The H330 is passthrough, but the HBA 330 is a direct HBA controller

They both use an LSI SAS3008 controller. The only difference between the firmware

PERC9 Series will allow individual drives to set as Non-RAID and will they retain the LED indicator status accordingly.

1. Enter the Dell PERC 9 Configuration Utility.

2. Click "Configuration Management" → "Convert to Non-RAID Disk"

3. Select Select Physical Disks to Convert to Non-RAID.

By default, all the disks are in RAID capable unconfi gured  state.
The user can also convert the RAID capable disks to non-RAID disks using either the BIOS configuration utility
or the UEFI/HII RAID confi guration utility.