最後更新: 2019-08-16

介紹

Windows Server NIC teaming provides hardware-independent bandwidth aggregation

and transparent failover suitable both for physical and virtualized servers.

(Before Server 2012 you had to rely on hardware/driver based NIC teaming

which obliged you to buy NICs from the same vendor)

Switch Independent mode

• address hash
• Hyper-V port - ties a VM to specific NIC in the team,
• Dynamic

Switch dependent modes

• LACP (dynamically identifies links that are connected between the host and the switch)
• Static Teaming

Server 2016

• up to 32 team interfaces per team
• If you connect NICs to different switches,
  both switches must be on the same subnet.

Setup

# Step 1

RD old nic & create team with spare nic

# Step 2

Set IP and gateway in New team(single nic)

# Step 3

RD connect team IP & add old nic to team

Standby adapter

The options for Standby Adapter are None (all adapters Active)

or your selection of a specific network adapter in the NIC Team that acts as a Standby adapter.