Show Setting

[admin@MikroTik] /snmp> print

[admin@MikroTik] /snmp community> print value-list

[admin@MikroTik] /interface> print oid

SNMP Seting

enabled (yes | no; Default: no)                 # Used to disable/enable SNMP service

trap-community (string; Default: public)

# 未必要

contact (string; Default: "")    Contact information

location (string; Default: "")    Location information

trap

trap-generators (interfaces | start-trap; Default: )   

What action will generate traps:
 - interfaces - interface changes;
 - start-trap - snmp server starting on the router

trap-interfaces (string | all; Default: )    

List of interfaces that traps are going to be sent out.

trap-target (list of IP/IPv6; Default: 0.0.0.0)    

IP (IPv4 or IPv6) addresses of SNMP data collectors that have to receive the trap

trap-version (1|2|3; Default: 1)    Version of SNMP protocol to use for trap

Community Setting

address (IP/IPv6 address; Default: 0.0.0.0/0)    

Addresses from which connections to SNMP server is allowed

read-access (yes | no; Default: yes)

write-access (yes | no; Default: no)

security (authorized | none | private; Default: none)

SNMPv3 的 Default Login Setting

authentication-password (string; Default: "")
authentication-protocol (MD5 | SHA1; Default: MD5)
encryption-password (string; Default: "")
encryption-protocol (DES | AES; Default: DES)